Filament guide plate for 2020 V / T slot extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This filament guide plate will allow the filament to be fed to the extruder without unspooling your whole filament spool
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This filament guide plate will allow the filament to be fed to the extruder without unspooling your whole filament spool. Specially made for high speed printers such as the Bambu Lab X1, X1 Carbon and P1P… (any 200mm/s+ printer)
NOTE:
- You'll need a Pneumatic Connector PC4-01 M10.
- 4 X M5 screws, Lock nuts, washers, spacers and Plastic Pulley Wheels
- 3 inches of 2.5 ID / 4 OD PTFE tubing… (great for abrasive filament)
- Can be used solo or it can be used with the “2020 V / T slot Spool holder converter”: https://www.printables.com/model/335739-2020-v-t-slot-spool-holder-converter
- Also used in the “Abrasive filament dispenser”:
https://www.printables.com/model/338258-abrasive-filament-dispenser-for-bambu-lab-x1-x1-ca
The idea came from these 2 models… So, you can consider my model a mashup :)
Willywidget:
https://www.printables.com/model/183262-2020-v-slot-reverse-bowden-top-mount-bracket-pc4-m
hackerbijay:
https://www.printables.com/model/58741-v-slot-gantry-plate-for-2020-extrusion