Cheap Dresser Drawer bottom supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've an old IKEA style, build it yourself, dresser. Unlike the ones they produce now, the bottom of the drawers is not…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've an old IKEA style, build it yourself, dresser. Unlike the ones they produce now, the bottom of the drawers is not made of MDF but is instead stiff cardboard. Over time, having had the drawers over-stuffed on occasion, the bottom tends to pop out of its grooves more easily these days. I wasn't sure if just supporting the corners would be enough, but it appears to be doing the trick.
Here's me testing it after all four corners were installed. https://youtu.be/ga9sQr8JmkY
Not sure if anyone needs a few of these and they may have other applications, but here it is.
They are designed to be screwed into the the base of the drawer with 1/2" self tapping screws.
Print Settings
Printer:
QU-BD Two-Up converted to a 3up!
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament:
Hatchbox PLA
Any
Notes:
Obviously don't use PLA if this thing stays out in hot weather.
Category: Containers