LDO Breakout PCB mount for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the LDO breakout PCB to a 2020 extrusion
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 176
- Wydruki
- 3
- Wyświetlenia
- 987
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I'm converting an Ender 3 Pro to a Voron Switchwire and I bought the LDO Toolhead Wiring Kit (https://docs.ldomotors.com/en/voron/toolhead_harness). I needed a way to mount the breakout pcb in the electronics area so I made this mount.
I used a couple STLs from this page and combined the Wago mount and the breakout pcb mount. And then I discoved that Dennis M had done the same. As far as I can tell, the models are 90% the same, only mine doesn't stick out as far.
Use four M2x10 self-tapping screws to attach the PCB to the part. To fix the mount to an extrusion use two M5x10 screws.