LDO Breakout PCB mount for 2020 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the LDO breakout PCB to a 2020 extrusion
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 176
- Makes
- 3
- Views
- 985
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I'm converting an Ender 3 Pro to a Voron Switchwire and I bought the LDO Toolhead Wiring Kit (https://docs.ldomotors.com/en/voron/toolhead_harness). I needed a way to mount the breakout pcb in the electronics area so I made this mount.
I used a couple STLs from this page and combined the Wago mount and the breakout pcb mount. And then I discoved that Dennis M had done the same. As far as I can tell, the models are 90% the same, only mine doesn't stick out as far.
Use four M2x10 self-tapping screws to attach the PCB to the part. To fix the mount to an extrusion use two M5x10 screws.