1 / 19
USB ports shelf for camper or RV phone charging station — zdjęcie 1
1 / 19

USB ports shelf for camper or RV phone charging station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a safe place in my camper to charge and store phone or other accessories. I designed this box which can hold…

Ocena
0 / 5
Polubienia
74
Pobrania
130
Wydruki
0
Wyświetlenia
2220
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a safe place in my camper to charge and store phone or other accessories.

I designed this box which can hold 4 USB charging ports and a global switch to poweroff everything and save battery when not used. I decided to integrate with a shelf to hold everything just near the table.

Box can be placed on the right side or on the left side of the shelf as needed.

I used aluminium L shape profile to keep stuff in place also during travel.

I covered corners and edges with printed parts to protect devices from aluminium borders.

For each shelf you need:

  • The USB ports box (print body and cover).
  • Two USB ports outlets (Amazon link below).
  • ON/OFF Switches (Amazon link below).
  • Piece of wood (you need 118mm large, 10mm thick. How long it's up to you).
  • Glue (to keep aluminium and wood together).
  • Black Plastic/Wood screws (Amazon link below).
  • Body Cover Black Screws and Inserts (Amazon link below).
  • Connectors (Amazon link below).
  • Wires (please check needed size based on power and length).
  • Fuse (some are included with outlets I used a dedicated fuse box).

USB ports connectors: https://www.amazon.it/gp/product/B089SNPYFL/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1

ON/OFF Switches: https://www.amazon.it/gp/product/B08S3BXVNH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Black Plastic/Wood screws: https://www.amazon.it/gp/product/B09NDBZ997/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1

Body Inserts: https://www.amazon.it/gp/product/B08BCRZZS3/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Body Cover Black Screws: https://www.amazon.it/gp/product/B08K8JLM34/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Connectors: https://www.amazon.it/gp/product/B07NK6L1PW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Aluminium and wood bought in a local hardware store.

If you have questions, please ask.

And don't forget to share photos.

Thank you.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Doesn't Matter

Supports:

Yes

Infill:

20%

Filament:

FiliAlfa Alfa+

Black Metal


Notes:

Each part needs different print settings. Ask for suggestions based on my experience.

Category: DIY

Tagi