MODULAR CABLE HANGER (IN TEN SIZES).
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular cable hanger in sizes to take one to ten cables.
- Ocena
- 4,75 / 5
- Polubienia
- 46
- Pobrania
- 269
- Wydruki
- 4
- Wyświetlenia
- 822
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Every cable hanger I found when I went looking was exactly the wrong size, and rather than remix the perfectly good one I already have I thought I'd start from scratch and fix that problem once and for all. In doing so I've added a few slots to provide a bit more flexibility of mounting, and revised my version ten times to give an infinite number of options.
There's nothing terribly innovative about this design, but you can download a model with any number of slots between one and ten. The overall length of the hanger and the number of slots are shown in the numbers in the STL name. ie “108_6” is 108mm wide and has 6 cable slots.
Each slot should easily hold five or even six cables.
This is an easy print in PLA, mine is with a 0.4mm nozzle and 0.2mm layer heights in “QUALITY” mode.