MODULAR CABLE HANGER (IN TEN SIZES).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular cable hanger in sizes to take one to ten cables.
- Rating
- 4.75 / 5
- Likes
- 46
- Downloads
- 269
- Makes
- 4
- Views
- 822
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Every cable hanger I found when I went looking was exactly the wrong size, and rather than remix the perfectly good one I already have I thought I'd start from scratch and fix that problem once and for all. In doing so I've added a few slots to provide a bit more flexibility of mounting, and revised my version ten times to give an infinite number of options.
There's nothing terribly innovative about this design, but you can download a model with any number of slots between one and ten. The overall length of the hanger and the number of slots are shown in the numbers in the STL name. ie “108_6” is 108mm wide and has 6 cable slots.
Each slot should easily hold five or even six cables.
This is an easy print in PLA, mine is with a 0.4mm nozzle and 0.2mm layer heights in “QUALITY” mode.