5.25 to 2.5 hard drive or SSD adapter for HP workstation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accommodates five 2.5" hard drives into a single 5.25" drive bay
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 402
- Wydruki
- 2
- Wyświetlenia
- 2838
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Accommodates five 2.5" hard drives into a single 5.25" drive bay (opted for five in order to have some space for air between the 2.5" drives). Modeled using the blank of a HP Z6 G4 workstation.
Use flat head screws for installing top and bottom hard hard drives! Flat headed screws allow the adapter to fit to it's place. Ball headed screws are too high, and will be in the way when sliding the adapter in!
Printed it using a 0.6 nozzle and 0.4 layer height. Add support manually in the slicer for the tiny little flat part of the top latch on the side. No other support is required.
Forgive the stringy print photo, PETG is just like this, to look nice was not an option when I printed it.