IKEA 365 10.6l Box Desiccant (silica gel) Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An effective (pretty low-profile) desiccant (silica gel) container to be used inside the IKEA 365 10.6l box.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 2888
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The IKEA 365 10.6l storage boxes are ideal for storing your filament. Add this 3d printed container, with your favorite desiccant (silica gel), in the box to keep it dry.
The desiccant container is not too big, pretty low-profile and fits nicely from side to side*.
Multiple versions included:
- With and without the use of M3 screws
- With and without the use of M3 heat set inserts
- With and without a chamfer in lid (for countersunk screws)
I use it with the countersunk screws; looks nice and when you bump the box the lid does not come off. Although without screws is probably fine as well.
Printed in this case with PETG 0.4 nozzle and 0.2 layer height, 2 perimeters, no supports (possibly with optional ‘avoid crossing perimeters’ enabled).
But PLA or other material is fine as well and settings don't matter that much as it's a simple box.
*Dimensions:
Outer: 158x53x26.5 mm
Inner: 152x47x23.5 mm