1 / 1
K40 Laser internal fan duct / fan shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original fan duct of my K40 was so large it significantly reduced the usable work area. This solves this problem.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 730
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (37)Powiązane
The original fan duct of my K40 was so large it significantly reduced the usable work area. This solves this problem.
This version is shorter, so it does not interfere with the toolhead.
There seem to be different versions of the K40, so that is why I made this version with the 80x40mm hole pattern for mounting.
Printed this in PETG at 0.2mm layer height, but other materials should work also.