1 / 1
Magnetic Support for Acrylic Side
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How place an acrylic side on a shelves without using screw? With this Magnetic Support.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I did these supports for 3mm Acrylic sheet without using screw or glue.
I used Ikea Bror like Shelves.
Here you can find also support to attach acrylic side to lateral side of Bror and also angular support for upper side.
You can find various STL:
- MagnetiClipRise: You can use to attach acrylic direct to metal side of Bror
- MagnetiClipSrew & MagnetiClipSrewSvas: These are used for side of Bror where there is hole of screw.
- MagnetiClipRise6cm: You can use in diagonal from corner to center of acrylic
- MagnetiClipRiseAngle: You can use for top of acrylic so weight will be released from other sides to top.
For magnets I used 8x3mm bought on Amazon site.
Like this one: https://www.amazon.it/gp/product/B074C79DJS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1