Bosch Professional - GTS 635 216 - Suction Hose Adapter To 36 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 387
- Wydruki
- 2
- Wyświetlenia
- 3209
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw. My vacuum cleaner from Einhell has a hose with an outer diameter of 36mm and an end socket wall thickness of 2mm. This adapter takes both into account and provides a secure fit and no obstacles for the sawdust.
3MF, STL, and f3d files attached.
Your opinion on this design and suggestions to make it even better is appreciated
Please also take a look at my other designs, printer parts, and tools.
If you like to support me and my work, please consider following me on.
If you like to buy me a coffee to stay productive and creative, you can do so by sending a tip via Prusaprinters.org or PayPal...
... or by using one of the following affiliate links down below (without any additional costs for you!).
Products seen or related to this project
Bosch Prof. GTS 635-216
Amazon.de
Amazon.co.uk
### Generic Affiliate Links- Amazon.co.uk
- eBay Germany
- GearBest.com
Thank you very much and happy printing,
Martin
Print instructions
3mf file provides all necessary presets:
- Print with brim for a secure vertical print orientation
- 3+ perimeters for wall strength
- 25%+ for the upper part where the geometry widens
I printed mine in PETG