Ender 5 Plus Corner Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just some aesthetic/protective covers for the bottom corners on an Ender 5 (Plus specifically)
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I like all these covers and caps, people have made for the Ender 5 plus, but I always felt like the bottom of the printer needed some love. These are just some corner covers to take the place of the little extrusion plugs included on the stock printer. They are not really tall enough to act as feet, but could be remixed that way if you wanted.
These would be fine with one screw to mount, but I put two holes that will accommodate an M3 or M4 x8mm screw and the associated t-nut, so if you have plenty to spare, you can use 2 screws and t-nuts per corner.
Should need no supports but you may want to print the bottom chamfer slow or with a lot of cooling because it is a straight 45-degree angle.