1 / 2
40x10 x-fusion E1 air shock suspension bushing/spacer — zdjęcie 1
1 / 2

40x10 x-fusion E1 air shock suspension bushing/spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PETG replacement bushing/spacer for x-fusion bike shock, still intact more than a year since install

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Initially I made this part as a temporary replacement while I waited for new aluminium bushings to arrive, but it seems like they work just fine, I've been riding the bike like this for at least half a year and no play developed in the bushing, no melting, the compressive strength of petg is good enough to replace the aluminium bushings

you need to sand fine layers both inside and outside and check the fit each time to get the tolerance right for your bike,

make sure to use a locking compound for the bolts when you're finished fitting the parts

I have had the stock replacement bushings for a long time but still I had no reason to replace them because this worked way better than expected

Tagi