Joystick Fix -- MSI Entertainment Arcade -- Ms Pac-Man
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces broken joystick in the MSI Entertainment TV Arcade games + Fixes issue with stock joystick sensitivity
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This joystick replaces a broken joystick in the MSI Entertainment TV Arcade games. The following is a list of compatible games that are designed with the same parts:
(See pictures for what these look like)
-Ms. Pac-Man
-Space Invaders
-Megaman 2
-Double Dragon
-Frogger
-Midway Classics Vol 1
-Namco Classics Vol 1
You will need super glue to permanently attach the shaft of the joystick to the 4-way internal selector switch. Just put a light coating of superglue around the end of the shaft and slide the 4-way selector over the shaft so it sits flush (see picture).
You will likely need to cut the shaft of the old joystick that has a broken 4-way selector to get it out of its housing once the box is opened up. When replacing with the new one, be sure that the labeled up/down portions of the 4-way selector run up and down. The surfaces are taller on the up/down sides. This fixes a problem where it was hard for the up/down movements to register with the machine with the old switch.
Print Settings
Resolution:
.2
Infill:
20% / 100%
Filament:
eSun PLA +
Notes:
Print the 4-way selector with 100% infill -- Lines or Aligned Rectilinear pattern.
The ball and shaft can be printed with 20% infill -- Cubic pattern.
I would recommend at least 3-4 walls and the same for top and bottom layers.
I printed using eSun PLA+
Temperature: 210°C hotend / 60°C bed
Category: Other