Joystick Fix -- MSI Entertainment Arcade -- Ms Pac-Man
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces broken joystick in the MSI Entertainment TV Arcade games + Fixes issue with stock joystick sensitivity
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This joystick replaces a broken joystick in the MSI Entertainment TV Arcade games. The following is a list of compatible games that are designed with the same parts:
(See pictures for what these look like)
-Ms. Pac-Man
-Space Invaders
-Megaman 2
-Double Dragon
-Frogger
-Midway Classics Vol 1
-Namco Classics Vol 1
You will need super glue to permanently attach the shaft of the joystick to the 4-way internal selector switch. Just put a light coating of superglue around the end of the shaft and slide the 4-way selector over the shaft so it sits flush (see picture).
You will likely need to cut the shaft of the old joystick that has a broken 4-way selector to get it out of its housing once the box is opened up. When replacing with the new one, be sure that the labeled up/down portions of the 4-way selector run up and down. The surfaces are taller on the up/down sides. This fixes a problem where it was hard for the up/down movements to register with the machine with the old switch.
Print Settings
Resolution:
.2
Infill:
20% / 100%
Filament:
eSun PLA +
Notes:
Print the 4-way selector with 100% infill -- Lines or Aligned Rectilinear pattern.
The ball and shaft can be printed with 20% infill -- Cubic pattern.
I would recommend at least 3-4 walls and the same for top and bottom layers.
I printed using eSun PLA+
Temperature: 210°C hotend / 60°C bed
Category: Other