Simple Battery Mount for Dewalt 20v, Flexvolt 60v, and Milwaukee M18
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With a simple modification to an already great design, this battery mount will work with batteries from Dewalt/Milwaukee
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 863
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
betterknownasmax posted this on Thingaverse. It's a simple, effective, and economical solution that's easy to print. His design worked as is with Dewalt 20v and flexvolt 60v batteries but I noticed with a small modification it would also work with Milwaukee's M18 batteries. I made that modification and here's the result. The Milwaukee batteries fit just a tiny bit tighter, but it doesn't hurt the part and works well.
I hope this helps others who own batteries from both manufacturers systems such as myself, or someone just looking for a simple and cheap M18 holder.
I used four perimeters and 20% gyroid infil. The one pictured on the left was some leftover Inland ABS and the black one on the right is in Prusament ASA made on a Raise3d Pro3 Plus.