Simple Battery Mount for Dewalt 20v, Flexvolt 60v, and Milwaukee M18
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With a simple modification to an already great design, this battery mount will work with batteries from Dewalt/Milwaukee
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 85
- Makes
- 2
- Views
- 862
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
betterknownasmax posted this on Thingaverse. It's a simple, effective, and economical solution that's easy to print. His design worked as is with Dewalt 20v and flexvolt 60v batteries but I noticed with a small modification it would also work with Milwaukee's M18 batteries. I made that modification and here's the result. The Milwaukee batteries fit just a tiny bit tighter, but it doesn't hurt the part and works well.
I hope this helps others who own batteries from both manufacturers systems such as myself, or someone just looking for a simple and cheap M18 holder.
I used four perimeters and 20% gyroid infil. The one pictured on the left was some leftover Inland ABS and the black one on the right is in Prusament ASA made on a Raise3d Pro3 Plus.