Skadis Magnet - Customizable and Super Sturdy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very sturdy magnet for the IKEA SKÅDIS pegboard that doesn't rattle or fall off as you use it
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 171
- Wydruki
- 3
- Wyświetlenia
- 3480
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
These are magnets for Ikea Skadis pegboards that are very sturdy and don't come off the board as you attach or remove things. They use the T-Nuts mounting system for a rattle-free tight fit and a very strong hold.
 | Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
Premade Sizes and Required Parts
These premade printed parts are made specifically for magnets from Supermagnete that ships all over Europe at a reasonable price, also to countries where I didn't provide a direct link.
If you have different magnets, you can customize the design to fit your own magnets.
Scroll down to the “Custom Sizes” section to learn how to customize the parts for your specific magnets. Feel free to publish your customizations as remixes or post your custom settings along with product links in your Makes.
CS-S-15-04-N - 15x4mm Countersunk Magnet - N35
| Qty | Name | Sourcing |
|---|---|---|
| 1 | CS-S-15-04-N Countersunk Neodymium Magnet | Supermagnete (CH, DE, NL, IT, ES) |
| 1 | M2.5x16 Countersunk Flat Head Cap Screw | Aliexpress |
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | Printed “Skadis CS-S-15-04-N Top.stl” | Download |
| 1 | Printed “Skadis CS-S-15-04-N Bottom.stl” | Download |
| 1 | Printed “Skadis T-Nut M2.5.stl” | Download |
CS-S-18-04-N - 18x4mm Countersunk Magnet - N35
| Qty | Name | Sourcing |
|---|---|---|
| 1 | CS-S-18-04-N Countersunk Neodymium Magnet | Supermagnete (CH, DE, NL, IT, ES) |
| 1 | M2.5x16 Countersunk Flat Head Cap Screw | Aliexpress |
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | Printed “Skadis CS-S-18-04-N Top.stl” | Download |
| 1 | Printed “Skadis CS-S-18-04-N Bottom.stl” | Download |
| 1 | Printed “Skadis T-Nut M2.5.stl” | Download |
CS-S-23-04-N - 23x4mm Countersunk Magnet - N35
| Qty | Name | Sourcing |
|---|---|---|
| 1 | CS-S-23-04-N Countersunk Neodymium Magnet | Supermagnete (CH, DE, NL, IT, ES) |
| 1 | M2.5x16 Countersunk Flat Head Cap Screw | Aliexpress |
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | Printed “Skadis CS-S-23-04-N Top.stl” | Download |
| 1 | Printed “Skadis CS-S-23-04-N Bottom.stl” | Download |
| 1 | Printed “Skadis T-Nut M2.5.stl” | Download |
R-19-09-06-N - 19x6mm Ring Magnet - N45
| Qty | Name | Sourcing |
|---|---|---|
| 1 | R-19-09-06-N Neodymium Ring Magnet | Supermagnete (CH, DE, NL, IT, ES) |
| 1 | M2.5x18+ Countersunk Flat Head Cap Screw | Aliexpress |
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | Printed “Skadis R-19-09-06-N Top.stl” | Download |
| 1 | Printed “Skadis R-19-09-06-N Bottom.stl” | Download |
| 1 | Printed “Skadis T-Nut M2.5.stl” | Download |
Custom Sizes
Customizable Dimensions Countersunk Magnets
Customizable Dimensions Ring Magnets
Customization on Onshape
- Open the customization link above for your type of magnet.
- In the upper section of the left sidebar, select “Custom” from the “Magnet” drop-down menu.
- Fill out the remaining dimensions according to the drawings above.
- If you check the “Print Orientation” checkbox the parts will be automatically oriented in the right orientation for printing.
- In the lower section of the sidebar, right-click on each part and select “Export” from the menu.
- In the export dialog, choose your desired export format (STL, STEP, 3MF, etc). If you select STL, make sure to select “millimeter” under “Unit”.
Parts
| Qty | Name | Sourcing |
|---|---|---|
| 1 | Countersunk or Ring Magnet | |
| 1 | M2.5 Countersunk Flat Head Cap Screw (see length calculation below) | Aliexpress |
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | Customized “Skadis Magnet Top.stl” | |
| 1 | Customized “Skadis Magnet Bottom.stl” | |
| 1 | Printed “Skadis T-Nut M2.5.stl” | Download |
Screw Length Calculation
Magnet thickness (H dimension) + 12mm rounded up to the next available size.
Printing
Print the parts in the original orientation. All STL files are pre-rotated.
Print Settings
- Material: PLA, PETG, TPU, anything
- Layer height: 0.2mm
- Extrusion width: 0.4mm
- Perimeters: 3
- Infill: 0% / doesn't matter
Assembly & Installation
Step 1 - T-Nuts
Prepare the T-Nut. Push an M2.5 hex nut into the bottom of ths T-Nut. You may have to use some pliers or other helper to push it in.
Step 2 - Assemble Magnet
Insert the magnet into the Top part with the countersunk side facing the printed part. Insert the M2.5 screw. Add the Bottom part from the other side with the alignment pegs facing away from the magnet. Make sure the tabs on the Bottom are aligned with the slots in the Top part.
You may optionally superglue the parts together. If you decide to glue the parts, assemble it without the screw first and then add the screw once the glue is cured. The screw must be able to rotate and move without resistance.
Step 3 - Complete Assembly
Screw the T-Nut on and leave a gap of about 2mm between the T-Nut and the Bottom part.
Step 4 - Installation
Align the T-Nut with the alignment begs on the Bottom. Push the whole assembly fully into the desired pegboard hole. Tighten the screw while applying some pressure on the scre driver but do not overtighten. The T-Nut will lock itself in the horizontal orientation
-