Voron Sticky Tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Voron Tap holder with increased retaining forces by adding a second set of magnets
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 3485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The Voron Tap is quite a nice probe to check the bed without having to adjust the “live-z” of the first layer.
The original design of the Voron Tap has magnets, that keep the print head in place during normal operation by attracting screws on the other side.
I wanted to be more on the safe side and increase the holding force. Just to make clear: I did not have problems, I just wanted more margin. Therefore I have replaced the screws with a second set of magnets (6x3mm). (See red circles in the picture)
So the overall retaining force is increased, I can sleep well, the world is safe again…