Voron Sticky Tap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Voron Tap holder with increased retaining forces by adding a second set of magnets
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 265
- Makes
- 2
- Views
- 3,485
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
The Voron Tap is quite a nice probe to check the bed without having to adjust the “live-z” of the first layer.
The original design of the Voron Tap has magnets, that keep the print head in place during normal operation by attracting screws on the other side.
I wanted to be more on the safe side and increase the holding force. Just to make clear: I did not have problems, I just wanted more margin. Therefore I have replaced the screws with a second set of magnets (6x3mm). (See red circles in the picture)
So the overall retaining force is increased, I can sleep well, the world is safe again…