1 / 5
Catch-All tray for keys with lanyard / neck straps — zdjęcie 1
1 / 5

Catch-All tray for keys with lanyard / neck straps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A catch-all tray for keys with lanyards.

Ocena
0 / 5
Polubienia
6
Pobrania
44
Wydruki
0
Wyświetlenia
300
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I use lanyards/neck straps for my keys and work ID card. When placing them on a table or on a tray, the straps always makes it look a bit messy. I wanted to design a simple solution to this. This tray has an extra compartment where you can place the lanyard to make it look a bit more civilized. The extra compartment can also be used for other items such as your phone.

 

Print instructions

The model is easy to print and various printer settings and materials can be used. The settings I used:

  • PLA
  • Layer height: 0.32mm with 0.4mm nozzle
  • Infill: 5%, cubic
  • Wall line count:2
  • Top/bottom layers: 4
  • If possible, use a rather large brim

Tagi