Moustache Mini Jars With Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some really cool looking, minimalistic jars.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are some awesome little pots that have some really cool moustaches on them. There are 5 different moustaches to choose from. The can be printed in around 2-3 hours so make the perfect little print to small small things such as paperclips or magnets.
You can print the lid (tophat) in one piece or you can print it in two pieces by printing a small TPU ring (as shown above) thst goes around it. If you want this option print the ‘tophat ringless’ and the ‘tophat ring’.
You could also do a colour change mid print to achieve the ring on the tophat.
You will need:
3d printed parts
4 6x3mm magnets
some glue (superglue is good)
Assembly: put the magnets in the holes (making sure they are attracting and not repeling) of the top hat and jar body. Then put on the top hat ring (if you chose that route) and possibly glue in place. You could also paint the moustaches if you want.
Please do not sell these in any form.