1 / 4
Fanatec CSL DD & DD PRO Boost Kit 180 (8NM) Mount - Series 15 & 40 Extrusion M8 Bolts — zdjęcie 1
1 / 4

Fanatec CSL DD & DD PRO Boost Kit 180 (8NM) Mount - Series 15 & 40 Extrusion M8 Bolts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum…

Ocena
5 / 5
Polubienia
95
Pobrania
745
Wydruki
6
Wyświetlenia
3357
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts.Print two mounts

The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the center points of the slots. However, I tested it on Sim Labs Series Extrusion and it worked just fine.
 

https://www.tnutz.com/product/ex-1530-black-2/

https://www.tnutz.com/product/ex-1545-black/

This mount allows 1mm of clearance from top to bottom for the power brick. The clearance works perfectly fine, but I added a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo.

*There is no need to use supports, simply print with the Fanatec Logo on its side.

This is a Remix of colliert11's mount made for series 40 extrusion https://www.thingiverse.com/thing:5030383

Print Settings

Printer Brand:

Creality

Rafts: 

No

Supports:

No

Resolution: 

.20mm

Infill:

30%

Filament:

Inland PLA+ 

Black Post-Printing =============

Optional: Add a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo and possibly the sides.

How I Designed This

Fusion 360

 

 

Category: Video Games

Tagi