3D Printed RC car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an RC Car I designed from scratch. It features Ackermann steering geometry and runs on a brushed DC motor.
- Ocena
- 0 / 5
- Polubienia
- 172
- Pobrania
- 1224
- Wydruki
- 0
- Wyświetlenia
- 12 989
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is my almost 100% 3d printed RC car. Originally I designed this project to use my custom esp32 PCBs but I included a chassis that is empty so that you can put whatever you want in it to control the car.
Parts List:
1x 3mm x 100mm shaft
2x 3mm x 30mm shaft
12x 3mm x 7mm x 3mm bearings
1x 12T 122A plastic gear
1x MG90s Servo Motor
3x Shaft Collar (1 for each front axel and one for the printed gear)
1x 280 DC motor
2x 6mm M2.5 screws(for motor)
7x M3 nylon locking nut
1x Regular Nut (for where “servo arm” connects to “ackermann”)
17x M3 washers
3x 12mm Button Head M3 screw
5x 25mm Button Head M3 screw (for all these screws, I recommend just getting this)
4x 3mm shaft wheels (I used these but I'm sure you could just print some on your own)
Let me know what you think! The fusion360 files are in here as wheel so feel free to modify and make best for your use case.
Github: https://github.com/tommybee456/ESP32-Car-Project
Youtube Video:
Easy EDA Projects: