Fan bracket for Cooler Master Hyper 612 v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a fan bracket for the very old Cooler Master Hyper 612 v1. It will NOT work for the v2 as the fin stack has a…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a fan bracket for the very old Cooler Master Hyper 612 v1. It will NOT work for the v2 as the fin stack has a different shape.
Mine broke because they were 10 years old and of course they became brittle, so they broke when I tried to remove them to replace the fan.
They work fine printed in PLA at 100% infill and they didn't break when I installed them to the cooler.
If they break for you, my suggestion is to apply some heat to ONE of the brackets to make it more flexible, and then hold it until it cools down. Use a lighter, not a heat gun, or you'll melt the fan. :)