4x5 Custom Macro Pad Case - 20 Key Mechanical Macro Keyboard for Pro Micro (USB-C or Micro USB)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case, switch plate and ring for a 20 key (4x5) mechanical macro pad built on a SparkFun Pro Micro. USB-C or micro USB.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 1273
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D printed case for a 20 key (4 by 5) mechanical macro pad. Three parts: a switch plate, a middle ring and a bottom. It is designed around the SparkFun Pro Micro, either the cheaper micro USB version or the USB-C version.
Files included
4x5Switchplate.stl - top plate that holds the switches
4x5Ring.stl - middle spacer ring
4x5Bottom.obj - bottom shell with the controller mount
Electronics
Designed for this microcontroller: SparkFun Pro Micro. You can use either the cheaper micro USB Pro Micro or the USB-C version.
I lost the Arduino code so good luck :D
Made in Fusion 360.
Also available on
ThangsDesigned for this microcontroller:
https://www.sparkfun.com/products/12640
You can use either the cheaper microusb pro micro or the usb-c version.
I lost the arduino code so good luck :D
made in fusion 360