Foot Pedal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a set of foot pedals for my computer, i couldn't find any that i liked, this provides the controller and pedal
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a set of foot pedals for my computer and realized there arent alot of free to use and open source options, i couldn't find any that i liked or thought would hold up to my usage, this set of files provides the controller casing, and the pedals themselves to make this weekend project you will need the following:
Soldering Equipment
3m screws, nuts and washers. I used these:
Screws
Headphone jacks x4 or less if you want less pedals, i used these:
Headphone Jacks
Springs x4 or less if you want less pedals, any 12.5 mm wide by 45 mm tall spring should work i got mine from a local hardware store for 1 USD each
keyboard keys x4 or less if you want less pedals, i used these:
Key Switches
headphone cables x4 or less if you want less pedals, any TRS headphone jack that is 3.5 mm will work, i used these:
Aux Cable
And the Brain for the Pedals, is a Arduino Pro Micro a common Cheap Hobbyist Board I bought Mine here:
Pro Micro
and of Course, a 3D Printer. I printed mine out of PETG at 20% infill, this design is not tested with PLA or ABS Please Do not ask. I used this filament:
eSUN PETG
Arduino Base .ino file