Improved FLSUN V400 Fan shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan cover for the FLSUN v400 that is a bit further from the fan (+4mm) and should reduce a bit of the noise.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 590
- Wydruki
- 5
- Wyświetlenia
- 2598
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a fan cover for the FLSUN v400 that is a bit further from the fan (+4mm) and should reduce a bit of the noise.
Modified the file to add more structural support to the side-pins and also added a few more slots to enhance airflow.
Print: Print at 0.2 layer and 30% gyroid infill.
Multicolor: Print it facing downwards and add a M600 (filament change) on layer 4 or 5 to do a multicolor print.
Edit: I have added a sliced gcode for the v400 that does the filament change pause and prints it perfectly. (remember to load your default bed mesh in your start print macro)