Educational FDM Cube (demonstration purposes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,15 € – 1,40 € netto (bez VAT)
Dla pliku: FDM_Cubes_0.15mm_PLA_MK3S_1h30m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,27 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 1,51 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
FDM Cube to show interested pople some possibilities that can be achieved through 3d Printing (FDM)
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 59
- Wydruki
- 3
- Wyświetlenia
- 1271
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
I was asked to help some students at a lokal shool to improove their 3D printing skills. So I printed a Hotend model and packed some of my prined parts. But I was still missing something to show many of the cool features that are possiblie with 3D Printing in one Design.
So I designed this FDM Cube to demonstrate the following possibilities that are not possible with standard procedures like drilling, cutting, ….
- Creating internal structures (Tunnel, Magnet, M3 Nut).
- Creating several pieces in one Part (tiny drawer).
- Different Materials/ Colours in one part.
- Different possibilities to attach screws (Nut, Plastic. Insert is not included yet)
- Different possibilities to fill the cavitys (Infill is visible!)
I started with some TPU Filament and asked them what they think where it will poke through. First the filament wents straight through the piece. The Second hole will direct it to the bottom. I show them that it is possible to see only through 1 of the bigger holes. They were quite surprised when the 3. hole led to the same side of the cube as the first one :)
Also there is a tiny hole at the bottom which is built like a snail shell and you can put quite a long distance of filament into it until it is full :)
Print & Assembly Instructions
I used 2 Colours of PLA printed with a 0,4 mm Nozzle and 0,15 mm layer height.
You need a good first layer and flow calibration to print the tiny drawer without problems.
As additional parts you may add
- 1 magnet (max 6 x 9 mm cylindrical but smaller are possible too and add a nice rattling to the cube!)
- 1 x M3 Nut
- 2 x M3 Screws
- 1 or more Filament pieces. I prefer (soft) TPU but PETG will work too for the bigger holes.
Slicing with Prusa Slicer
- Add a color change at around 0,8 mm height.
- Add a printing break at 9,95 mm heigt to insert the magnet and M3 nut.
- Add a height range modifier at 15,2 - 20 mm: Set the top solid layers to 0 (Layers and Perimeters).
- Add modifier boxes to change the Infill in the upper part of the cube.
As an alternative the project settings are preset in the .3mf file or use the Gcode (MK3s, PLA)