1 / 5
Bambu Lab (or Prusa) steel sheet holder (magnetic) - remix — zdjęcie 1
1 / 5

Bambu Lab (or Prusa) steel sheet holder (magnetic) - remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a robust steel sheet holder for Bambu Lab or Prusa steel sheets. It has provisions for magnets. This is a remix.

Ocena
5 / 5
Polubienia
45
Pobrania
267
Wydruki
4
Wyświetlenia
1830
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

28 April 2023: I will no longer be supporting revisions to this model. You can use it as is, and add negative shapes to fit the dimension of your tape/magnets. I have been so busy that this has fallen off the list of priorities. It's still a good model by itself, and you can add the negative shapes easily in whichever slicer you use.

31 March 2023: Hindsight is 20/20 right? I will be changing the attachment method from magnets to include a small channel so that double-sided foam tape can be used. I hope this is a better idea. Thank you for chiming in, roadshow.

29 March 2023: Please note that the 3 magnet slots are insufficient to support the weight of the sheet holder (even in an empty state). I will be revising the files to have more magnet slots, as well as shave a good chunk of weight off. This means less filament and better results. 

__________________________________________________________________________________________________________

I really liked the original design by Glen Waelbers, but when I got around to thinking about it, I don't change the nozzles on my Bambu Lab printers very often. That being said, I didn't want to store them where dust and debris can fall into my nozzles, so I quickly reduced my need to have nozzle storage built into the sheet holder. I decided to store the nozzles in a separate accessory box and leave the scraper out where I need it.

I remixed the design to keep the same overall aesthetic, although nozzle storage and print bed scraper dock are eliminated. I've also added slots in the back to accept 10*3 round magnets, to attach this to the printer and not have to worry about it falling over, or printing some kind of stabilizing feet. I suppose you could also use the recessed channels to install any kind of hardware that you want, in case you'd rather attach it to a wall or something.

 

  • The provided g-code is for printing in PLA. I used Polymaker Polyterra and it came out great, but you can use this .gcode for any other PLA that you have!

     
  • There are 2 versions of .gcode. one with supports, and one without. I printed mine with supports, just because I didn't want to deal with any layer shift, missed lines, or sagging extrusions. Honestly, it should be okay without it. ***

     
  • Please make sure your Z offset is dialed in and your first layers come out clean. The base of this model has some VERY long lines. If your first layer isn't dialed in, I suggest printing a calibration to get it tuned before printing this. ***

Tagi