Liczymy pasujące modele…
This is a complete skirt mod for Voron 2.4. The version for Voron Tridents can be found here: https://www.printables.com/model/644512-flat-mesh-skirt-voron-trident-alpha-version Configurations Sizes 250 mm 300 mm 350 mm Power Inlets…
This is a Pantograph. It is used to copy a drawing at a scale, usually 50% (1/2). Simply follow the contour of the object or drawing to duplicate it at scale. Can be use to follow the contour of a part to transfer it on paper at scale.…
Remix with increased height, more premade STLs, fixed mesh and better stand without a slope. Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer. Print in an grey-ish filament and not white, since…
ein Regalhalter kompatibel mit der Honeycomb Storage Wall mit einer Tiefe von 250mm & Höhe 200mm.
Description This is a complete skirt mod for Voron Trident. The stock skirts on Vorons feature very big hexagons which allow for fingers to pass through and are also aestehtically too “busy” for my taste. The aim here is on one side to…
A four piece shower caddy tight snap fit. Printed on a Prusa taking full advantage of 250mm bed. Two sides options available, one with a hook to hold a razor on the side. printed with two layers and 15% infill it seems plenty strong in…
V-slot extrusions 250mm long 2020 2040 4040
Eine einfache Leitplanke für Carrera Hybrid. Kosten < 15 Cent. Einfach von der Seite auf die Fahrbahn aufstecken. Im Slicer kann man die Leitplanke beliebig beschriften.
Slide-on jaw protectors for the excellent Knipex 250mm wrench pliers. According to Sergey, also works on 180mm pliers when scaled at 86%. Although there are already some 3D-print models around, this was mainly a small project for myself:…
Couldn't find any decent Canon EFS 55-250mm lens hoods that actually fit and locked, so. I made this. It may have to be scaled how you see fit, but it fits for me and it works. So, I'll share it lol I printed it with Prusament petg and no…
This is a slightly modified version of the original ADT LINK UT3G USB4 eGPU enclosure with the following changes: Adjusted height and length to support most dual-slot GPUs up to 265mm in length Adjusted width to fit a slim 120mm front fan…
This Non printable mm Ruler is to help with scaling in slicer. Print instructions This Non printable mm Ruler is to help with scaling in slicer.
I hand meshed this with calipers and redesigned it to have tolerance. I have also printed them multiple times to test. Print the parts on the flat bottom side. You will need to reorient it in your slicer.
Overview: I made this top-load trading card box to store Magic: the Gathering (TM) cards I collected from centuries past. It will store around 800 cards and will fit cards having light sleeves. The lift-off lid has a 0.6mm width and…
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
¾" Pipe that fits with my other ¾" models. BSP thread that runs nice and easy.
This is a remix to make the largest print in place ball bearing I can fit on my print bed, 250mm in diameter! This is not a simple scale up that would have thrown off the tolerances and created excessive play in the bearing. I've scaled…
This is a tray designed to fit around the faucet in our kitchen, between the wall and sink edge. Since it's a custom design it may or may not work for you, but I've also provided the .F3D file to share and be used for inspiration. This is…
Holds tow Knipex Cobra 250mm made for the gridfinity system. Have fun with your Cobras ;-)
I am currently working on an Ender 3 Pro Switchwire Conversion, using the Enderwire design from boubounokefalos. https://github.com/boubounokefalos/Ender_SW After printing my printable version of the lower deck for the Enderwire, I had…
This is for 250 spools. The center fits 53.5mm holes and the OD is 200mm I know it works on OVV3D and ZiRO 250 rolls. I included the step file so it can be edited
Monitor riser which lifts the monitor 250mm of the table top. designed to be used on table tops with 18.75mm height, in my case specifically for my cougar gaming desk. riser top plate thickness 18mm (used ordinary pine board) 300mm width.…
A very simple cube frame.
Print out these side panels for your 250mm tall Rook MK1. Takes up to 30 M3x8mm socket head screws. Print out of PLA, I used 0.2mm layer heights with 5 walls, top and bottom layers. Note that this will not fit on an Ender 3, but should…
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger…
I designed these mounts because I didn't like how the 5015 fans stuck out from under the 250mm bed. There are two versions of this mount: Solid - Use this if you just want to bolt a 4010 blower to a 2020 extrusion Cut Out - Use this if…
This is a turntable/lazy susan that I've been using for airbrushing and spray painting. Assembly is simple; get some 6mm ball bearings (I used airsoft bbs), and lubricate them lightly with grease such as white lithium. Fill the round…
250mm and 280mm version of the Mudguard
Ich habe die Schienen für einen selbstgebauten Schrank aus Regalböden (Maße: 80x30x1,6 cm) entworfen. Der Schrank hat eine Innentiefe von 28,5 cm und die Fächer sind innen 37,1 cm breit. Die Schienen habe ich 2,5 cm von der Rückwand…
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is a set that have been designed for smaller build plates.…
Remixed to add support for TridentSkirtLights For more info and the screen parts visit the project this was remixed from: Thick skirts for Voron Clicky Clack Fridge Door ----- This was a request by one of my long term patron, I didn't…
For storing mini rolls or whatever. Fits the standard ½" / 19mm conduit size.
Greetings! And yes, I have gone off on a tangent again. This time after picking up a cheap tabletop pool set from the shops on the request of my youngest boy, I thought to myself, "I wonder if I could design a decent printable mini…
Migrating from thingiverse https://www.thingiverse.com/thing:4411669 Anti draft BackDraft stopper Adaptor for a 250mm Ceiling Extractor Clipsal AirFlow CE250 easily removable/swapable with the 150mm flexible duck Adaptor to remove Solder…
Printing tips PLA optimized for 0.2mm layer height and a 0.4mm nozzle 15% infil part cooling on 100% fan speed V prípadě zajmu napište na komentář o jinou velikost a já ji sem doplním.
PLA, 0.2mm layer height, 3 perimeters, 15% gyroid infill for for pleasant stiffness
A sieve with a nice honeycomb pattern. Hole size is 5mm.
A topography-optimized shelf bracket for larger shelves and heavier weights. The mounting holes are 4mm tapered to 8mm. Sized and designed to just barely fit four brackets inside a Bambu Lab X1 series printer. Recommend using a 3mm brim…
Voron Trident Bed Model just Scaled down to fit for 250mm (maybe not 10000% perfect but works)
Need specific sizes for a puzzle that was 75*50, so i made those 250mm parts from the original ones.
This is a modified version of the chassis to enable printing on a printer with a 250mm bed. Versions available for V1.0 and V1.1 in the respectivly named folders. The RUDE project can be found here: https://github.com/iniqy/RUDE The…
Turntable conversion to a 250MM table for your bigger objects, and a shroud to go around the table. Scale shroud in Z to however tall you want it, print 1, 2, 3….. it's designed to “Slide” together. Using some rail oil or any lubricant…
DoomCube with filament reel Tophat This is all the files including the CAD to build a Doomcube V2.4 with a ‘’Lazy Suzan'' filament holder in the top hat. Mods Used: Umbelical:…
Fits: Canon EF-S 55-250mm Consider using supports for the tabs at the bottom I've also included a test print with which you can make sure that the lens hood fits without wasting too much filament
This is a remix of the 350mm center section of 3DPrintDemon's awesome Canopy Top Hat Remix sized for a 250mm Voron 2.4. Print them in ASA or ABS lying flat on the build plate using Voron structural part settings with snug supports for the…
Originally designed as a footrest but came out pretty great for an angled stand as well. I have uploaded the step files as well for anyone interested in designing bigger version or attachments. There are 2 versions included, one with full…
Migrating from thingiverse https://www.thingiverse.com/thing:4387788 Adapter to connect a removable 150mm flexible duck to a 250mm Ceiling Extractor to remove Solder / Flux fume. designed to be printed on a CR-10S PRO , so a 300X300 bed…
Jan 2025 - Small Update (See Below) Introduction: This a complete redesign (and size increase) of my previous 2019 British K6 phone box. It's a wholly new project, planned as a lamp from the outset, and it uses a 12 volt G4 LED disc…
Don't tell show 250 x 220 is great for most things But sometimes a little bit more may be useful. To got there a bigger sheet is needed I recommend the BiQu 257x257 sheets they fit into the core one and have an enhanced grip which is…
I integrated Kanrogs spoolholder into ZombieHedgehogs sidepanel Perfect fit for Rook Mk1 with 250mm Z-rods
A 50mm tall, 250mm diameter segmented circle with lap joints. This was made for pouring tools for telescope mirror making, with a filleted edge so it can be set against the mirror in question to produce a matched curve. Print 4 of these…
Compact checkers/chess board 250x250mm
Note: This is version 2 which correctly accounts for a 1 mm gap between the panels. If you've ever wanted a canopy for your Voron 2.4 but didn't want to give up your handles, this model is for you! Please see JSmith17's model for…
A simple and snug peg board attachment for Knipex 250mm Plier Wrench. Printed with right side down for optimal layer direction for strength of pegs with supports.
These are modified version of the braces to be compatable with the modified chassis for 250mm beds found here: https://www.printables.com/model/748716 Versions available for V1.0 and V1.1 in the respectivly named folders. The RUDE project…
I use Voron Trident 250 with Box turtle and during filament changes, printer does perform poop and kicks the filament to to the right side of the frame. My purge location is 245,245 and to collect the poop, I've made this small bucket.…
This 90° corner clamp is a sturdy L-shaped tool designed for accurate right-angle alignment in woodworking, furniture making, and general workshop applications. The bracket consists of two equal arms forming a 90° angle. Both arms feature…
If you have a 250x250mm bed and need to print RUDE's v1.1 Chassis, here it is. Note that this is for RUDE v1.1 Chassis only, not compatible with v1.0 parts.
This is a robust rim design for heavy outdoor activities (lawn mower). It can be combined with all tires using a 200mm dovetail tire interface DT200. Main characteristics: Dimensions: 200 x 40mm Mounting: 4 holes for M4 screws, distance:…
CZ: Víko které překrývá terárium, zabraňuje útěku křečka a pádům předmětů do terária. Přidáním jména mazlíčka jsme získali originální kousek ,který udělal dětem radost. Tisknutí z ASA bez spodních a horních vrstev pro vznik dírkovaného…
Print with default Voron PIF settings. Large enough to let the BTT CAN cable and some others thru
This is a design of a 250mm tire with DT200 rim interface which can be used as a replacement for the original Ardumower wheels. Main characteristics: Dimensions: 250 x 40mm ' Rim and tire are printed separately. So you can use a stiff…
Gridfinity Impact Socket Set (10mm–24mm) + 250mm Extension – 3D Printed Model This 3D printed model replicates a complete Grifinity Impact Socket Set, featuring sockets ranging from 10mm to 24mm along with a 250mm (10-inch) extension bar.…
A back panel for Rook Mk1 with 250mm rods. It has mounting holes for a Meanwell LRS-350 psu and a cable channel that screw into the side of the psu. It is designed to match ZombieHedgehogs sidepanels…
🧰 Description This is a parametric flat-pack storage box generator designed for 3D printers with limited build volume (like 250×250 beds). Instead of printing one large object, this system creates flat printable panels that assemble into…
Deutsch: Ringe um die Pflanzen im Mulch-Beet besser zu schützen. Das Wässern geht somit leichter und das Wasser fliesst weniger davon. Dazu sieht es noch sehr schön aus. Zusätzlich hat es noch an 4 Stellen kleine Löcher um den Ring mit…
This is an 250mm long variant of my 10mm Cableclip
This is a simple and light-weight rim design for moderate applications (laboratory & development). It can be combined with all tires using a 200mm dovetail tire interface DT200. Printing To get a satisfying result please first carefully…
These two parts just fit between the OTA tube and the Steeltrack plate. They eliminate any chance of stray light and pack the space maybe aiding rigidity and squareness. Just loosen the plate and push these parts in on each side then…
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts. Flat 58mm…
Rodenstock Imagon 250mm filters
-Stylish Art hanger - Decorate your room with this nice look poster hanger frame! It will work with photos, art, poster, canvas! - No more frame or framing work! Simplicity is beauty! We use strong magnets to frame art by clamping at the…
The mini turntable that comes with the Revopoint is too small, so I made a new one that is the largest that the X1C can print on.
Sometimes a tile or glass breaker would come in handy for the odd corner or small notch. I adapted my model of the jaw protectors into a tile breaker, the parallel action of the Knipex pliers wrench is ideal for this purpose. The lower…
Uzávěr česna s různými prostupy - na jednu včelu, na 4 včely, . Plné uzavření česna se provede otočením šoupátka. Vejde se na tiskovou podložku Prusa MKx.
Schale Durchmesser 250mm für Silwy Magnet System zum einkleben von Magnet 25x5mm
easy print Container/Organizer, we use it inside a bathroom mirror cupboard to store cosmetics and so on. It has two dividers. Both stls are supposed to be printed in "Vase Mode" ("Spiralize outer contour" in cura) with a 0.8mm nozzle…
Resin prints sometimes fail and something they fall off the table and you lose pieces. Instead of throwing out those minis this is a good way to recycle them into a paint palette. When painting you can play around with drybrushing or…
This is a 250 mm (≈10") low-profile Lazy Susan that uses standard 14 mm marbles as the bearing surface for smooth, quiet rotation — no specialty bearing rings required. The design captures 45 marbles between printed races to distribute…
Simple sheetholder for two sheets to put under a table or shelf. Designed for 2.5-3mm screws, mini mum length 8mm. Print on the long thin side. Please post a make and leave a rating if you print it. :)
I know that there are a lot of wiper / purge buckets out there for Vorons but I struggled to find anything that would work with my combination of 4WD Monolith belts that run across the front on the XY beam and a Beacon Probe that…
I need two cameras to capture depth perception when in FPV mode. This bracket holds two cameras and two transceivers and bolts onto the front of the quadcopter frame with three screws. Once snapped into place, both cameras will look…
250 mm grindstone holder for wet grinders like the Tormek T8. There is a model for one or two stones. The stones are held securely and can dry on the stand, while not wasting plastic like some very thick models. Printable on a Prusa MINI.…
Small tweak to the design, tightened the spacing between nozzles to let three sit side by side.
EN: Insert the locking stops (1 to 4 pieces as required) into the holes around the adjustable pin. From the front of the pliers you put on the cap that serves as a locking stops holder and everything secure with a clip at the other end.…
If using any of the 256x256 or larger printers this will be printable by picking the ‘back’ of the frame on the print bed. The included hex nut holder is designed for m3 hex nuts. This will hold the nuts in place to more easily secure the…
Warning: 289mm tip to tip on base, smaller version now available too. In fact I prefer the look of the smaller one.
模型转盘大升级！250mm尺寸完美解决摆放问题！@您是否曾为您的模型转盘尺寸小而烦恼？摆放的模型超出旋转范围，一不小心就会掉出来，让您精心的布置毁于一旦。@现在，我们为您带来全新设计的250mm模型转盘，让您的烦恼烟消云散！更大的尺寸，完美适配各种模型，无论大小，都能稳稳地摆放在转盘上，随着转盘的转动，展现自己的魅力。@不仅如此，250mm模型转盘还采用优质材料制成，坚固耐用，确保您的模型安全。其流畅的旋转设计让您可以轻松旋转模型，从各个角度欣赏它们的美。@有了250mm模…
What is this? This is the TL;DR quick print of the Enhanced Full Print Bed Trick. All settings are included and the purge line is placed above the test pattern so ne need to peel it off during the print. Read the real deal story to learn…
These brackets allow you to run a 2.4 style 250mm heat bed for you standard sized voron legacy (370mm extrusion lengths with corner cubes).
-Stylish Art hanger - Decorate your room with this nice look poster hanger frame! It will work with photos, art, poster, canvas! - No more frame or framing work! Simplicity is beauty! We use strong magnets to frame art by clamping at the…
Gridfinity Halter für LetsBastel 250mm Anschlagwinkel inkl. Kleinteilablage
This is a player board to hold the cards and large faction sheet (or ships instead). gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the cards and…
this elongates the linear rail in case you have a shorter one to use. it fits the table top cut out as well.
Tophat mounting holes on 250mm voron tophat too closely spaced. Created a narrower version of Sturdy handles and added Voron Racing stripe. Two Versions available: Tophat directly to the top frame or Tophat with a 3mm Spacer all around…
I made this supports for 3 kinds of led. A 12 led cluster from HobbyKing, 12V, (ref 12LED-RE / 12LED-BL / 12LED-GR / 12LED-WH) to be positionned at the back or in the front. A 3 led with buzzer for Naze32, 5V, (Ref 090000013-0) to be…
na venkovní požití, doporučuji ASA, je UV odolné Pri tisku se mi osvedcil konkretne ASA 275, pro nižší teplotu tisku a bedu, nemá tendenci se kroutit. Tiskl jsem na Boxovanej Prusa XL.
