40x40 Extrusion Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect fit for holding your phone, for a bed level picture.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use Octo4a for one of my printers, and I run it off an old android phone. Well the camera is pretty great for time lapses and quality is pretty decent. I needed a way to hold it upright so it would give me the best result for the time lapse.
Lands pretty solid on either the top or bottom v-slot on the 40x40 rails.
VERSION UPDATES: I was unhappy how the finished product looked in the last revision, I have modified the design, raised the bottom plate to allow the micro USB to be plugged in while in the holder.
Print in the set orientation, with SUPPORTS! If you can find a way to print with no supports, please let me know.
Simple solution for a simple problem!