Filament transport indicator / NEMA Stepper Axis position indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple stepper indicator dial that can be printed in under 10 minutes and fits on the motor shaft
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple indicator dial that can be printed in under 10 minutes and fits on the motor shaft of my filament transport stepper. So you can see easily if the filament motor is working as expected and how fast it goes. Version 1 has a recessed indicator which works best when coloured. Dual extruder guys, feel free to add a second colour there :-)
Version 2 is shaped like an arrow head.
I suspect they should work with any vanilla NEMA motor on many other printer brands - please leave your experiences and suggestions in the comment section.
Print instructions
Category: 3D Printer Accessories Summary
This is a simple indicator dial that can be printed in under 10 minutes and fits on the motor shaft of my filament transport stepper. So you can see easily if the filament motor is working as expected and how fast it goes. Version 1 has a recessed indicator which works best when coloured. Dual extruder guys, feel free to add a second colour there :-)
Version 2 is shaped like an arrow head.
I suspect they should work with any vanilla NEMA motor on many other printer brands - please leave your experiences and suggestions in the comment section.
Print Settings
Printer: Anycubic i3 Mega (UB)
Rafts: No
Supports: No
Resolution: 1,5
Infill: 15%
Notes:
This is a small part. I recommend at least 5-6 rounds of skirtat some distance so the nozzle is properly primed when starting the actual print.