135mm to 120 mm fan adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
135mm to 120 mm fan adapter
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 840
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
135mm to 120mm Adapter (fan)
I came across a PSU with a dead fan, it was working fine otherwise, but when I went to change the fan it was easily larger than a 120mm fan. I defaulted to a 140mm fan, crimped on new ends, and went to mount the fan only to realize the spacing was off. I then measured the fan it was 135mm, which I have never come across in any PC related fans. A quick search showed a replacement fan was $25-60+, which was more than I wanted to invest. I went with designing an adapter
There are 2 models one is flat on the top for the 135mm and countersunk hole for the 120mm. The other model both sets of holes are countersunk. In my case the PSU had tapered holes from the 135mm into the fan, so I tried to mimic this geometry.
The total thickness of the model is 4mm. I based the countersink holes on the screws that came with the PSU. The screws were 6.5mm diameter across for the heads.
Printed in Space Grey ABS at 0.2mm layer height, and 20%infill.