Liczymy pasujące modele…
Summary This is a (almost) fully 3d-printable kit of rings to connect the Samyang/Rokinon 135mm f/2.0 lens onto a light and small star tracker (such as the Sky Watcher Star Adventurer) or an equatorial mount (such as the Sky Watcher EQ6).…
Press for burger patties in 135mm size. Every minced meat shrinks when cooked on the grill or in the frying pan. Depending on the type of meat, fat content and water content, the meat can shrink by 10% to 30%. That's why the press here…
This is an adapter system to mount a ZWO EAF electronic automatic focuser to a Samyang 135mm f/2.0 ED UMC lens for astrophotography. This is similar to other popular EAF mounts for William Optics Redcat 51 telescopes, but specifically…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
This Bahtinov Mask is used for the Samyang 135mm F/2.0 lens.
Adapting Samyang135mm f/2.0 ED and 85mm f/1.5 IF UMC VDSLR lens for astronomy with EAF or OnStep focuser EAF holder is compatible for SCT and Newton telescope. For fine manual focus ring available too. Optional rings for old Carl Zeiss…
IT Pinguino De Longhi, adattatore scarico aria calda vero l'esterno, diametro interno 130mm, esterno 135mm, identico all'originale, adattabile a qualsiasi condizionatore EN Pinguino De Longhi Portable Air Conditioner air vent, exhaust…
Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear…
135mm to 120mm Adapter (fan) I came across a PSU with a dead fan, it was working fine otherwise, but when I went to change the fan it was easily larger than a 120mm fan. I defaulted to a 140mm fan, crimped on new ends, and went to mount…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
Canon EF-S 18-135mm f/3.5-5.6 IS STM is still a good lens, and acts as my primary lens. The official lens hood (EW-73B) is however overpriced, and new one is needed every now and then, as those have a tendecy to crack. A model for lens…
A mount for the Samyang 135. M5 screws and M5 insert nuts are required.
This is a replacement hood for the Sony ALC-SH0003 used on the135mm f/1.8 Lens. This is a work in progress, so use at your own risk, I cant make any guarantees for this. I've printed this in PLA on my Ultimaker 2 in Black and works fine…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
schöne Aufbewahrungsdose, hier speziell für ein Klangspiel, damit dieses beim Transport zum Yoga nicht leidet. Einfach zu drucken, keine Nacharbeit nötig. Viel Spass damit
This focuser aims to solve a couple of problems: 1. Aside from the motor, it needs no parts (belts, gear, etc) 2. It stays fixed to the lens (not unique, but useful) 3. The gear design increases contact patch, reducing backlash 4.…
A photo frame inspired from https://www.thingiverse.com/thing:344307 It can accomodate a landscape photo sized 195x135 mm This design need supports (10% or slightly less), i printed it standing and only few supports were added on the top…
WIP Remix of arca swiss plate and top bracket for better heated insert fit. Inserts are pressed into opposite side from which they will be pulled to help avoid pullout in case you have junk inserts like me. After pressing in the heated…
Astrophotography harvester for Samyang 135mm f/2.0 ED version 2024 Support ZWO EAF and ZWO ASiair My original version is here OpenSCAD source code on GitHub BOM 1x Samynag 135mm f/2.0 ED (Canon or Pentax version) 1x ZWO EAF 1x ZWO ASiair…
Upravená délka nohou stojanu pro akustickou kytaru. Délka 135mm.
bahtinov_mask 135mm for all lenses up to 134mm, (scalable ;) )
Designed to support a lamp on the Honeycomb Storage Wall [HSW]. It can be anchored to the wall if extra support is needed, further increasing the weight capacity.
I had bought the lens thinking it was Nikon F mount cause Pentax K and Nikon F look similar. I removed the Pentax K mounting Bayonette and created a Nikon F version from it. I did have to remove the little Metall hook thats part of the…
NOT YET TESTED Please let me/the CN thread know if you tested it and it works! There are many Samyang 135mm f/2 lenses for mirrorless cameras on the second-hand market, but many people want to fit them on DSLRs. Thanks to this thread on…
Use PLA, PETG, or ASA for the best results. Make sure to use a 0.4mm nozzle size and 0.2mm layer height. Cover the hole with md5 foil, starting with the fat ring, fastening to it, and then placing it in the holder inside.
Print with automatic supports and pull them out with pliers.
In anticipation of the August 21st, 2017 Solar Eclipse, I decided to work on a solar film adapter for the 18-135mm STM lens on my Canon 70D. I want to give credit to two Thingiverse designers for seeding my design:…
By THD TakumiHomeDarkroom
Print at 0.3 100% Infill
Generic ring for guide scope, internal diameter is 135mm, external is 165mm. I used it with a SkyWatcher MC90. The ring is thick enough to ensure good stiffness. The 3 holes on the ring are for M6 brass inserts.
A simple lens hood for the 135mm f2,8 Soligor lens. There are multiple versions of this lens, this one is with a 55mm filter thread and Minolta MD mount. Print instructions PETG or similar material would be best. PLA is too brittle. I…
Just a modification to my useability but thought it could be useful for others. To use, please make sure to download the other parts from danibor09's page. 80mm top/bottom knob top plate
Juego de anillas y soportes para instalar en objetivo Samyang. Este setup permite instalar enfocador EAF ZWO, soporte para tubo guia, asa superior y soporte para ASIAIR. Se recomienda imprimir en ASA y los detalles en blanco. Para este…
I don't usually need to use the kase filter holder at the same time as the lens hood on my lenses. But - I use the Samyang (or Rokinon - seems to be the same lens) 135mm f2 lens for astrophotography - and in certain situations I am…
hatch cover for swift boats
This is a support for mount samyang 135mm on a Arcaswiss clamp and use it on the Open Astro Explorer. You can also attach an Open Astro Guider on it and a driver focuser with a custom board actual not shared but plan to share it. I also…
Simple friction-fit lens cap for a Super-Takumar 135mm F3.5 (Model 1) vintage lens. The tolerances for the part are designed for my printer and tuned for PLA. A PETG version will be coming in the future for outdoor use. I don't know if…
Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR Support ZWO EAF and ZWO ASiair OpenSCAD source code on GitHub BOM 1x Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR 1x PK-EOS Mount Adapter Ring 1x ZWO…
Triangular base 135mm Each element is 125mm high - 8 elements for 1m Approximately 3.5m can be obtained from 1kg of filament. Truss for spotlights, speakers, etc. Can also be used as a stand for tables or shelves. Very decorative.…
Here my improved version of the Bahtinov mask (compared to other prints): This print uses about a third less material Smaller size, fits nice in to a pocket a bit bigger gaps, for brighter stars no too tight fitment on the lens hood Be…
Massive Schoblacken für 135mm Schraubstock. Duch die Vertikale und Horizontale V-Nut können auch Runde Teile und Rohre sicher gespannt werden.
Mounting rings and a Bahtinov focusing mask designed for the Samyang 135mm f/2 ED UMC / Rokinon 135mm f/2 lens. Update June 6th, 2026: Added fron and rear top rings parts for the focuser holder Added focuser holder The Bahtinov mask…
3D printable M42×1 to Sony E-mount adapter designed for the Tokina 135mm f/2.8. This adapter allows you to use the Tokina 135mm lens on Sony E-mount cameras such as Sony a6000, a6300, a6400, and Sony A7 series. The adapter has a 27 mm…
Also available on my website .
Get full information about handling and how to print the cookie cutter on my blog: https://nerd-corner.com/round-edge-cookie-cutter//
I was in need of a cap for a vintage telephoto lens I own (Revuenon-Special 135mm f2.8) but it will fit any lens that has the same diameter (60mm). If you like the model but have another lens, drop a comment, I will make the modifications…
1 perimiter 10% infill (I used cubic) 95A Shore TPU from 3DJAKE Fits and holds it perfectly, simple model 40min print.
As explained in an article I posted at DPReview's adapted lens forum , the Logetronic 135mm f/2.2 Logetar is a pretty strange lens... but it is fast and covers a quite large image area at infinity focus. This thing consists of a standard…
TPU insert should be glued. The base part has recesses for 7mm adhesive pads.
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
There are a lot of cheap enlarging lenses that work quite well as taking lenses, and the Rodenstock Omegaron 135mm f/4.5 is one of the most appealing I've found. Even wide open, this designed-for-4x5 lens manages to give crisp details on…
3D printable Bahtinov mask designed specifically for the Tokina 135mm f/2.8 with M42×1 thread. Perfect for astrophotography, this mask allows precise star focusing in seconds. Lightweight, easy to print, and accurate for infinity focus.…
I wanted some very legible letters that would pop - and Franklin Gothic Bold really speaks that way. I used the Libre Franklin font library from Google and built these in Fusion. I gave each a 3mm border. If you would like to do a…
Gridfinity bin Canon FD 135mm f2.5
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL X200xY3xZ135 X206xY3xZ135 X206xY3xZ135 X206xY3xZ135 Redistribution of the 3D STL…
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL X200xY3xZ135 X206xY3xZ135 X206xY3xZ135 X206xY3xZ135 Redistribution of the 3D STL…
Protects your lens from dust, scratches, and damage during storage or transport. Easy to print, lightweight, and fits perfectly.
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL 1 X200xY3xZ135 2 X206xY3xZ135 3 X206xY3xZ135 4 X206xY3xZ135 Redistribution of the 3D…
This is a low profile replacement handle, compatible with the sliding patio door handle made by Scheleger’s that is sadly now out of production. Dimensions Total height: 180mm Distance between screw centres: 135mm Printing ⚠ I’m very new…
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL X200xY2xZ135 X206xY2xZ135 X206xY2xZ135 X206xY2xZ135 Redistribution of the 3D STL…
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL X200xY2xZ135 X206xY2xZ135 X206xY2xZ135 X206xY2xZ135 Redistribution of the 3D STL…
2D ornament split into parts with mounting holes and flat pins for easy connection of the individual ornament sections. ZIP folder contains stored in STL X200xY3xZ135 X206xY3xZ135 X206xY3xZ135 X206xY3xZ135 Redistribution of the 3D STL…
There are a lot of cheap enlarging lenses that work quite well as taking lenses, and the Komuranon 135mm f/5.6 is often claimed to be a high-end choice at a bargain price. I'm not convinced. This designed-for-4x5 lens manages to resolve…
Juego de anillas y soportes para instalar en objetivo Samyang. Este setup permite instalar enfocador EAF ZWO, soporte para tubo guia, asa superior y soporte para ASIAIR. Se recomienda imprimir en ASA y los detalles en blanco. Para este…
Triangular base 135mm Each element is 125mm high - 8 elements for 1m Approximately 3.5m can be obtained from 1kg of filament. Truss for spotlights, speakers, etc. Can also be used as a stand for tables or shelves. Very decorative.…
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
Massive Schoblacken für 135mm Schraubstock. Duch die Vertikale und Horizontale V-Nut können auch Runde Teile und Rohre sicher gespannt werden.
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
This is a rough design for a floor panel where people were stepping on the jacks and breaking them. This is designed to protect the ports while still allowing easy access to the network and power jacks.
Purchase the Rokinon 135mm f/2 lens - https://amzn.to/3QN8Uko Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave EDIT 1-28-25 New “generic” version of the rig included. This version removes the non-standard…
Sonnenfilter für TS APO 100Q Dieser Sonnenfilter wurde speziell für meinen TS APO 100Q Refraktor entwickelt und in Prusament PETG gedruckt. Druckeinstellungen: Schichthöhe: 0,20 mm (SPEED) Material: Prusament PETG Stützen: Überall Infill:…
Dog Food Sachet holder for 90mm by 140mm sachets CFPETG 237'c 80'c 45mm .5 noz .3 layer 10% infill Gyroid 22.5 hrs print its on the to print list this week, so yet to print but its a box! Category: Pets
My Ender 3 V2 approach for Ender 3 Aluminum Extrusion Covers by SpeedyKiwi.
Hello, I have a Garden Screen for 1000 l barrel 135mm for you. It is suitable as a screen against dirt at the roof drain. It is built for a 135mm barrel mouth diameter. A very good helper, you don't have to clean the barrel so often. It…
Replacement hood for the 135 F2L. Fits in the original lens hood mount. It's my first real design from scratch, so don't hate on it, but it does fit very well on my lens, clicks into place with the original lens hood mount. I have…
This clips on to 135mm spools so they can work with the Bambu AMS without needing to rewind the filament. If it doesn't perfectly fit your spool, consider cutting off the tabs and gluing it into place.
Customized version of https://www.thingiverse.com/thing:3396601 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3396601 Instructions Using the following options: length = 135.3 side_extension_width = 0…
My power supply fan died, and turns out its a 135mm fan, hard to find and expensive. This mod is an attempt to adapt a 140mm fan and replace the failed 135mm fan. Category: 3D Printing
I'm planning to photograph the upcoming solar eclipse on Apr. 8th 2024 and needed to make a solar filter adapter/cover for my camera. I have a canon 70D with an 18-135mm lens. This hood adapter fits in the “grooves” of the lens and…
I liked the original model enough that I wanted to install it in a bit restrictive high area in my setup, so instead off the original 200mm length I cut it down to be 135mm.
Fine-tune the height of your monitor with this Monitor Stand.
![Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR](https://media.printables.com/media/prints/1116201/images/8431782_befdcc04-f9f2-4a85-bdd8-38d52b944702_41af4cad-e170-4f1c-aa6a-d68827a15950/p18-135-01.jpg)
