1 / 6
Elegoo Neptune 2s Psu Fan Air Duct Diverted Upwards — zdjęcie 1
1 / 6

Elegoo Neptune 2s Psu Fan Air Duct Diverted Upwards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ideal For Side By Side Action!

Ocena
5 / 5
Polubienia
9
Pobrania
66
Wydruki
1
Wyświetlenia
412
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have two Elegoo Neptune 2s side by side and needed to redirect the draft from the psu from one on the left away from the one on the right and back wasn't an option either so i made this one.

Prints easily with organic supports to hold up the screw holes, uses the original hardware, nothing extra is needed and can be pointed down  too if you want to.

The duct may also fit similar psu's but i cannot test as i only have Neptune's but the holes measure 70mm center to center, top left to bottom right. let me know if you try and they fit!

I printed these in black Pla+ @0.2mm layer Height using organic supports in prusa slicer.

Tagi