Double 40mm Fan support for MendelMax 1.5 and 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this small support to hold a couple of 40mm fan, the plate is made to fit aluminum profiles of a mendelmax…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I designed this small support to hold a couple of 40mm fan, the plate is made to fit aluminum profiles of a mendelmax 1.5!
I'm using it as part of the cooling system of the electronics.
UPDATE:
User @Ubermeisters try it on his Mendel max 2.0 and it works!!
Print instructions
Category: 3D Printer Accessories Summary
I designed this small support to hold a couple of 40mm fan, the plate is made to fit aluminum profiles of a mendelmax 1.5!
I'm using it as part of the cooling system of the electronics.
UPDATE:
User @Ubermeisters try it on his Mendel max 2.0 and it works!!
Instructions
Print it without support, I printed my out of PLA 3mm with a 0.5nozzle.
0.3mm layers/0.2 infill/ 2 top-bottom / 2 wall.
It takes 20 min to print at 100mm/min.
It's design to fit M3x12 socket screw to hold the fan, and M5x10 socket screw to be fixed to the aluminum profiles with a couple of t-slot nut.
thank you!