Modular Enclosure with Door and Hinges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Enclosure. Due the different lengths and the M/M and F/M ends multiple enclosures are possible to make.
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 1685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT: First i want to tank you all who downloaded this Model i never thought it would get that interrest. :)
Added 50mm Corners and 50mm Door-Corners for smaller Printers and more versability.
The Corners are 150mm in each Dimension with a Groove for 3mm Sheets.
The Bars got MALE-MALE and FEMALE-MALE ends and are made in 3 different Lengths - 100mm, 150mm and 200mm (without pins).
Due the different Lengths and the m-m / f-m ends different kinds of Enclosures are possible to realize and the Parts should be printable even at smaller Printers.
If you need a Bar with a Length in between, the simplest Way is to scale the next sized Bar in +/- X Direction and maybe cut the pin.
The Hinges are ment to be glued in place (left or right hand side) and you can and a 1mm thick Metall Washer to the base of the Pin for smoother operation.