Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outdoor Sun/Rain Shield for TP-Link Tapo T310 Temperature and Humidity Zigbee Sensor
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 1736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I found an excellent radiation shield model from @ilMitch_97530. Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also posted the STEP files.
Modifications:
First I had to enlarge all the parts by 30%. I adjusted the shape of the Top Part for better printing and of course I had to remodel the Sensor Holder. I also lengthened the Wall Holder by 120 mm. In my opinion, the Radiation Shield would be too close to the wall and it could affect the sensor's readings.
Print instructions:
Due to UV resistance, I decided to use ASA, specifically Spectrum ASA 275 in white colour of course.. It is a very well printable material and a closed chamber is not required for printing. It's just a good idea to apply a separation layer (3DLAC, etc.) to the hotbed. If, even after cooling, the print still sticks too tightly to the hotbed, Isopropyl alcohol and waiting a while will help.
Some parts require supports. Please see the attached 3MF files for detailed print settings.
Part List:
- Middle Part [x2]
- Sensor Holder [x1]
- Support Part [x1]
- Top Part [x1]
- Wall Holder [optionaly x1]
- Wall Holder, Long [optionaly x1]
- Wood Stainless Screws 3,5x30 or 4x30 [x2]
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Disclaimer:
Please keep in mind that the TP-Link Tapo T310 sensor IS NOT intended for outdoor use. I cannot rule out that the sensor may be damaged in extreme weather conditions.
Note:
Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much.
A special thanks to @ilMitch_97530 for the original design.
Changelog:
[11/11/2023]
In order to increase the strength of the attachment to the wall, I had to update the parts to the V03 version:
- Radiation Shield - Wall Holder V03
- Radiation Shield - Wall Holder, Long V03
 |  |
Happy printing!