1 / 6
Cable Spine (Updated 03-07-2023)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The perfect way to manage your dangling cables!
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 362
- Wydruki
- 5
- Wyświetlenia
- 2126
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 5) (Komentarze: 12)Remiksy (0)Kolekcje (128)Powiązane
The perfect way to manage your dangling cables!
In the past I have tried various options when it comes to cable management such as zip-ties, cable-sleeves and the go-to cable-chain with the small latches but none of them felt right to me.
Changelog
Version-2 Release:
- Tolerances are now a default of 0.1mm across the board.
- The width of the arms are now 2mm by default seeing how the slightly thinner ones were slightly too brittle.
- A guiding shaft has been added (roughly 3mm wide) to allow for a wire of filament to be inserted as a guide and extra rigidity for the whole assembly.
- A mounting-plate version has been included to allow assembly directly onto a 2020 extrusion with a variation of m3 and m4.
- Version 2 is backwards compatible with version 1.
Version-1 Release:
- 0.00mmcl (no clearance socket)
- 0.25mmcl (0.25mm clearance socket)
- Wide (Wider version)
- Thin (1.2mm wide clamps)
- Thick (2.0mm wide clamps)
This part was designed and created within Plasticity, can't upload the file because Printables doesn't support it :/
If you have any questions or remarks, leave a comment or shoot an email to [email protected]