1 / 6
Cable Spine (Updated 03-07-2023)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The perfect way to manage your dangling cables!
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 363
- Makes
- 5
- Views
- 2,127
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The perfect way to manage your dangling cables!
In the past I have tried various options when it comes to cable management such as zip-ties, cable-sleeves and the go-to cable-chain with the small latches but none of them felt right to me.
Changelog
Version-2 Release:
- Tolerances are now a default of 0.1mm across the board.
- The width of the arms are now 2mm by default seeing how the slightly thinner ones were slightly too brittle.
- A guiding shaft has been added (roughly 3mm wide) to allow for a wire of filament to be inserted as a guide and extra rigidity for the whole assembly.
- A mounting-plate version has been included to allow assembly directly onto a 2020 extrusion with a variation of m3 and m4.
- Version 2 is backwards compatible with version 1.
Version-1 Release:
- 0.00mmcl (no clearance socket)
- 0.25mmcl (0.25mm clearance socket)
- Wide (Wider version)
- Thin (1.2mm wide clamps)
- Thick (2.0mm wide clamps)
This part was designed and created within Plasticity, can't upload the file because Printables doesn't support it :/
If you have any questions or remarks, leave a comment or shoot an email to [email protected]