1 / 6
Anycubic Kobra Mainboard Cover with 92 mm fan — zdjęcie 1
1 / 6

Anycubic Kobra Mainboard Cover with 92 mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mainboard Cover with 92 mm fan

Ocena
0 / 5
Polubienia
23
Pobrania
116
Wydruki
1
Wyświetlenia
840
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix on “Anycubic Kobra - Mainboard cover for 80mm fan” by lucky449

One day I started to hear a lot of noise from my 3d printer, so I decided to replace a fan at the bottom, I choose 92 mm fan as the biggest that fits and simply because it is quieter

I use low speed fan Arctic F9 Silent (92x92x25, 1000 RPM)

You can use the Fusion 360 files as well

 

Important! 

To use this cover, you need to have “Anycubic Kobra Squash Feet” or other new feet to lift your 3d printer 

 

You'll need:

  • 4x M3x26 mm Screws 
  • 4x M3 Hex Nut

 

Printing:

Material: PLA or other

Nozzle: 0.6 mm

Layer Height: 0.3 mm 

Support: No

Infill: 15%

 

Tagi