1 / 11
A-lot-of-HDD in a mini PC case — zdjęcie 1
1 / 11

A-lot-of-HDD in a mini PC case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

How to build a NAS in a mini-ITX case (Cooler Master Elite 110)

Ocena
0 / 5
Polubienia
20
Pobrania
122
Wydruki
0
Wyświetlenia
3186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I designed these component to fit 5 HDD (3.25") and 1 SSD (2.5") into a Cooler Master Elite 110 that can fit only 2 HDD.
How do you need:
- 1 case CM Elite 110 (I'm not sure if this project is compatible with other cases)
- 1 mini-ITX motherboard (I used Gigabyte GA-J3455N-D3H) 
- 1 small form factor PSU FlexATX (I used SilverStone SST-FX350-G)
- up to 5 3.25" hard disk drives
- 1 2.5" SSD for OS
- 1 90 mm fan (rear)
- 1 120/140 mm fan (front)
- 4 screw M4x35
- 4 nuts M4
- 1 PCI-E SATA adapter, if the MB haven't enaugh sata ports
- some sata and power cables
- an operative system for NAS like Freenas https://www.truenas.com/freenas/

Tagi