1 / 2
Bekant design switch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the original old fashioned IKEA Bekant control - good looking hex shape :) and better usability.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This switch moves the table down if you push it from the top and moves the table up if you push it from below.
Print hints:
- printed in PLA on a Prusa MKS3
- switch box & mount is printed with 0.4 nozzle at 0.3mm layer height
- switch handle has a better haptic with 0.2mm layer height
- box & handle need support and are best printed in the given orientation
Material
- 2x M2 4mm thread
- 2x M2 ruthex threaded insert
- 4x Wood screws flat head
- 2x Micro switch 6x6x4,5mm
- 3x flexible wires for connecting the switches
- 3x short stiff wires for the connector (works with 22awg)
Mounting hints
- use flexible wires to have free movement on the handle
- check if the connector is correct common, down, up (from right to left)
- check if the micro switches sit flat on the surface
- there is no top cover as it is directly screwed on the table so make sure that the box is completely screwed to the table
- check if the handle moved freely
- check that the mounting parts parallel to minimize friction on the handle
Opening original control box:
https://www.ifixit.com/Teardown/Ikea+Bekant+Controller+Teardown/142516