Bosch IXO Adapter Holder for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed IXO holder some time ago, but still had angle adapters laying around. So here we come...
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 151
- Wydruki
- 3
- Wyświetlenia
- 468
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As said…for my beloved Skadis board I printed and designed several holders. For my Bosch Ixo screwdriver I used this model. But then the problem came. Still had those Angle and Off-set Angle adapters laying around.
After I spent third time at least 10 minutes searching for them when I needed them, I have decided to design Skadis holders for them as well (as I could not find ones I would like here on Printables).
So….here we are. Simple. Snug supports recommended for the hook. Print on the base.
2 will fit right next to each other on Skadis board. Also uses hook and “security pin” so that you do not accidentally take it off the board when taking the adapter out.
And as always - please find attached STL, 3MF and GCODE (for Prusa Mini).
Enjoy.
