Liczymy pasujące modele…
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Under table / Toolbox Holster for the Bosch IXO ( https://amzn.to/3m5ENTq ) electric screwdriver. Keeps the tool secure in place even vertically. Designed for the 5th generation but I have also tested it with 1st generation and it also…
I just mixed up Tylers brilliant model to accept 10x6mm (or two 10x3mm) magnets instead of ball bearings. It was just easier for me because i was having a problem finding just a couple of ball bearings (who wants to buy 50, right?). All…
Ist ein Produkt von den Computer spiel Satisfactroy
Fits v4.1 of the OmniFixo clips which are slighly bigger than the more recent versions.
Printable 3D model. Torregrossa is a tower located in Jijona's castle (Spain). STL file.
Printable 3D model. Pou de la Neu located in Xixona/Jijona. STL file.
A box with a tray for the OMNIFIXO and pinecil, easy customizable. It uses the OMNIFIXO as the lid and it's secured by their own magnets. Perfect for travel.
If something happened to your plastic magnet covers (or you didn't have them at all 😉), you can print this ones. Are they stackable one above other? – Yes Does upside down feature through 'ring" works? – Yes Depending on your printer you…
This is a box to create a fully portable, small soldering kit based on the Omnifixo Helping Hands . The box uses the Omnifixo magnets for securely holding the box shut - no additional magnets or hardware needed. Each magnet (with clamp…
Lightweight table stand for the BOSCH IXO 7. Holds 12 bits. An additional standard-size bit can remain attached to the drill while it is in the stand. The model is easy to print (no supports required). Any material can be used. I use the…
"Those whose eyes have met, and those whose eyes have not." "72 minutes." "Kill." 'Tis thou. Flee thee not, for the P-Prescript pointeth to thee/
Holds 4x attachment pieces for the Bosch IXO screwdriver. Connects to Multiboard.
The original design looked really nice, and I wanted to use it on my Euro pegboard, so I modified the design and changed the hooks to make them compatible.
Don Quixote Buste Français : Ce buste de Don Quichotte propose une interprétation sculpturale fidèle du célèbre personnage issu du roman Don Quichotte de Miguel de Cervantes. Inspiré des représentations les plus emblématiques du chevalier…
Deutsch: Einfache Halterung um den kleinen Bosch Akkuschrauber besser greifen zukönnen. So haben auch kleine Dinge seinen Platz! English: Simple stand for a better grip on the small Bosch IXO screwdriver. So even small things have their…
A neat way to store the Bosch IXO drill accessory, its drill bits, and another attachment. Each drill bit slot has a space for a 6x3 magnet. The use of magnets is optional, however, and the bits will stay in place without them. When used…
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
Suporte da roldana eixo Z impressora RENDER 3 V3 SE
Securely attach a Bosch IXO VI with its bits to a SKADIS pegboard using T-Nuts. This remix scores points over the original with its more robust mounting system. Created after printing the original and breaking off its hooks. No supports…
Diesen Abroller für Klebebänder habe ich konstruiert, gedruckt, montiert und in Verwendung. Zur Erhöhung der Standfestigkeit habe ich in der Strebe ein Metallstück SW 19 mm eingelegt. To increase the stability, I inserted a piece of metal…
Now two options for printing - one piece with supports, or two pieces with no supports. I print in PLA+ as in a side by side trial of PLA and PETG the PETG part failed first. Expect to get around 3 years of normal home mowing from the PLA…
Simple wall mount for the Bosch IXO Print Settings Printer: Spark Cube XL Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 15-20 Infill: 25%-35% Category: Tool Holders & Boxes
Simple little rack for the bits that come with a Bosch IXO Print Settings Printer: Spark Cube xl Rafts: Doesn't Matter Supports: No Resolution: 15-20 Infill: 25 Category: Tool Holders & Boxes
Printed Bambu X1C mit AMS ESUN ABS+ Silber / Devil Design RED ABS+ 0,2 Standard Normaler Support wird benötigt, Baum (auto) wird nicht reichen es werden 6 M3*30 benotigt
Parts USB C breakout board 20mm wide 14mm deep max Please make sure they have 5.1k Ohm (aka 512) pulldown resistors on the cc pins! This requests 5V via USB PD 2x pogo pins Pictures use P75 J1, but anything with similar body dimensions…
Passend für Bosch IXO V https://www.conrad.de/de/bosch-home-and-garden-ixo-v-akku-schrauber-36-v-15-ah-li-ion-inkl-akku-1275338.html Category: Tool Holders & Boxes
Gridfinity holder for b+m Ixon Core bicycle lamp. The model was designed with FreeCAD, it is based on this parametric model: https://than.gs/m/121299 This model is part of the gridfinity collection that you can find here:…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Fluff Do you like how Omnifixo snaps together into its own case? I do too, so feeling absolutely love-struck by that thing I tried to create a storage box for soldering utilities that works on the same principle. With serious snapping,…
Here is my Walking Dead Daryl Dixon Coaster. Three coasters fit perfect in the Coaster Holder Print instructions Unassociated tags: daryl dixon Category: Food & Drink
This is work in Progress. I'm driving for 4 weeks with this construction and I'm quite happy so far. Source https://www.tinkercad.com/things/bJPM3s5V0bq-trek-920-lampe-2 BOM 4 Heat Sink Inserts M3 (…
Case for Contixo 4k Camera. Came with a drone. Dimensions match Hero 3/4 but the button locations are slightly different. I used a piece of clear plastic for the lense cover Print Settings Printer: REPRAP Rafts: No **Supports:** No…
This remix features slightly more ergonomic cutouts to make it easier to access
Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 15 Perimeters: 2 Filament: TPU
This 3D model is a custom-designed standing dustpan head, created to fit a standard 22mm diameter broom handle (handle not included). Designed for use in a standing position, this dustpan model features a vertical handle socket to provide…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
First, thanks to the creator of the original model for coming here to look at this print. Second thanks to the improved version creator. Did not print one of them, but added slightly improved ones I thought I needed. The first change I…
Fits v4.1 of the OmniFixo clips which are slighly bigger than the more recent versions.
Printed in PLA with 0.2 layer height and 0.4mm nozzle. No supports needed.
A tray for the Omnifixo M4.4 fieldbox to allow it to be removed with content and use Omnifixo vertically. Two versions are included: one with the layout of the original divider and one with larger compartments. Update: Added two versions…
I made a large version of the Omnifixo case because the original feels very fragile and removing magnets is kinda pain for me. It's nice to have a case where every part has it place and looks tidy, but I don't have the nerves to remove…
The modified Omnifixo field box by Xkonti is a very nice printability improvement to the original case. But the case is still aimed for carrying with you. Since my Omnifixo mostly just stays at my desk and I want it out of the way when…
This is pretty much for my own use, but I figured people might also have the same soldering iron & omnifixo combo and want to easily carry some basic stuff with them. I set the compartments this way to be able to store extra soldering…
Travel box for the Omnifixo third hand, based on the original with my own modifications.
Get omnifixo at https://omnifixo.com/ Simple base for my omnifixo M4.4, with some storage space for my Xiaomi Electric Screwdriver and its bits set. The omnifixo is held in place by round 5x2 mm magnets. There's also space in the base for…
This uses a Makita bit extension inside (diameter 11 mm, length 78 mm). For the attachment point at the driver, remove the mechanism from another attachment (in my case the offset one, see last picture). Onshape Link:…
Wall mounted display stand angled at 25° for the ixo, altaya, fabbri; models. This is part of the Ferrari collection 43 scale models. The stand is able to house a 13.2cm x 6.6cm base and has a lip to prevent the model from sliding off.…
Closed bottom tray for the Omnifixo M4.4 injection molded field box. The current M4.4 comes with an injection molded (IM) field box. I first tried the closed bottom tray remix created by @PjotrStrog, but it did not fit the IM box (his…
Hello everyone. As of right now this is the final coin made, I am making Ryoshu's coin and will try to get that uploaded on New Year's Eve. But here is my favorite sinner's coin. These series of models were uploaded much earlier on my…
At the request of a Redditor, I added 6mm x 2mm magnet holes to the top of the original model.
Reaproveitei um pedaço de um fuso T8 passo 6 como eixo, o Knob e o carrinho já são impressos com rosca trapezoidal para este padrão “ender 3 e similares” mas pode ser alterado facilmente. Impresso com 5 perimetros, 6 base e 7 topo com 20%…
The magnetic holding strength is significantly weaker than using the stock bases as standoffs. I recommend using a stock base for the top and bottom of your stacks.
I am a big fan of my Bosch IXO6, it is a very handy drill for small stuff around the house or working on prototypes. In the past I used a hex based drill chuck for for drilling which always was a bit cluncky and not easy to center. I…
Levná DIY sonda k PCBite nebo Omnifixo / A cheap DIY probe for PCBite or Omnifixo English version below. Článek o testovací sondě můžete najít u mě na webu https://chiptron.cz/articles.php?article_id=344 Navrhl jsem levnou DIY sondu,…
A friend asked me to make this so i made it there is nothing more to say to that- hope u have a nice day :> https://nixos.org/ oh idk how to do multicolours on printables and i used my A1 mini here is the link for that as well-…
I now have a Omnifixo M4 kit, which I love, but my electronics carry kit bag isn't big enough to hold them, so I took the attached original model, cut out the parts that held the Omnifixo parts and then mirrored and mapped them into my…
The case uses the following materials: fixpoint solder (45mm diameter, 27mm height) M4 soldering tip: https://www.amazon.de/dp/B00W7QDUHK chipquick flux: https://www.amazon.de/dp/B00HKJTJ6U I made it to fit my Modifi3d Pro Tool and used…
The Omnifixo is attached under the desk using double-sided adhesive tape. Once in place, it can be easily slid in and out as needed. This provides a simple and space-saving way to keep it accessible without taking up extra desk space.
Ersatzteil für Halter Fahrradlampe
Bosch Toy screwdriver ixolino BIT Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: min. 30%
Halterung für bis zu 3 Bosch IXO Aufsätze. Schnell und einfach für die IKEA Skadis Lochplatte. Wenig Platz für viel Ordnung.
This is a remix that fits to the screws of a Smoby workbench
It is printed with PLA in default settings with supports in 0.2mm height. Edit 2025-09-09: I added version 2, where was reworked models for screw drivers, tweezers and screw case and was added model for SpeedyBee adapter and flux. This…
This is a container for a portable soldering station using the Omnifixo 3rd hand and the Fanttik soldering iron. I've included a plain version for just the soldering iron as well as a slim and thicker version if you're using the Omnifixo…
Jeu du Quixo (OXO) il faut imprimer 25 dés Quixo game (OXO) 25 dice need to be printed
The "Lid right direction stl." is facing the box in the right way when you want to open it. I accidently printed it the wrong way. So I did both options.
I loved the original design but didn't like how hard it was to grab the magnetic feet and helping hands from the bottom of the case. The design also limited use of that area for other things. This redesign attempts to fix that problem.…
Bosch IXO Wallmount to save space on the desk. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 24 Notes: Infill-Type : 30 degree Post-Printing ============= Category: Organization
Print and assemble a NixOS logo at any color and fit it into a keyhole slot.
A pegboard holder for your Omnifixo M4. The pegboard hooks have a two-inch pitch. This model is easy to print on its base, with basic supports enabled for the three hooks. I printed it with Polymaker PolyTerra Marble White PLA at 0.2…
This is a insert for the Bosch Ixo to hold ¼ inch hex drill bits under the stock tool insert.
This is second improved version of the GoPro compatible bike light mount for the IXON Core 2 by Busch + Müller. In theory the manufacturer of the lamp offeres this adapter (371291B), however, I was unable to aquire it anywhere. The mount…
This divider allows for 10 storage compartments inside the Omnifixo M4.4 kit. We have integrated this solution into our solder training program at Artisan Electronics and the Makers Third Hand is a great addition. Thanks Omnifixo!…
Printed in PLA with 2 walls and 10% infill. Uses 2 universal pegs for mounting.
A new 3D figurine generated by AI, Don Quixote. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Asterix Magic Potion Gourd (Asterixova čutora)
An alternative style mount for a Busch & Müller Ixon Core using a rubber o-ring. It uses the quick release plastic part of the original mount which is screwed onto this adapter/part. To increase friction a rubber pad can be glued into the…
limbus company 🔥🔥🔥 🗣 🗣 🗣 I made this lance using TinkerCAD, so that's why the text is going out of the lance instead of being indented inside.
Jednoduché držení kabelu v drážce při rozvodech elektiky v dome, Dražka 30-65mm
I have printed Omnifixo - Pinecil box for myself and because I don't have any short tips for Pinecil, I wanted to make the space for them useful for solder. But I just didn't want to throw it in there, so I made this solder holder/coil to…
A reasonably simple design to mount the Bosch IXO electric screwdriver (6th Generation) to a wall.
Gridfinity screwdriver insert Bosch IXO. Two insert variants, with horizontal adapters and vertical adapters.
Hello, I made this version of the Fortress of Solitude from Superman comic, I hope you enjoy. When I made this I print the first layers with green glow in the dark filament, then I switch to transparent and I start filling the inner…
Bosch IXO holder for Multiboard, use multipoint/multirail to attach to the board
I would advice to print with brim as you can see ears tends to warp.
I use this to store in a drawer, but could be used on a wall as well. Intended to be used with this click rim and this multibin
Accessory for Bosch IXO for attaching the charging station to a Skadis Multi Board wall. The template was intended for a honeycomb wall, but I wanted it to fit the Skadis wall, so I modified it accordingly. I also adapted the appropriate…
Accessory for the Bosch IXO attachment head for storage on a Skadis multi-board wall For four tool heads The idea came from Printables. Originally intended for screwing, I wanted a holder for Skadis. I also modified a holder for the Bosch…
Due to small detail size 0,1 layer height is recommended. Also account for plastic shrinkage. Scaling up to 10% might be required.
Print upright as shown in the 3rd pic. The mount is fixed from the underside of the shelf (to prevent visible damage) with however many screws as you want - I found 1 to be enough
Burger Beagle's Omnifixo case is outstanding, but as cool as dedicated spots are for things, I often find myself wishing for a denser storage solution. Some people say I'm a pack rat... With this remix, I took one of the coolest parts of…
