1:43 scale ixo / altaya ferrari collection (fabbri) wall mount stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted display angled 25° for the ixo altaya fabbri; ferrari collection 43 scale models 13.2cm x 6.6cm. 5mm screw
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Wall mounted display stand angled at 25° for the ixo, altaya, fabbri; models. This is part of the Ferrari collection 43 scale models. The stand is able to house a 13.2cm x 6.6cm base and has a lip to prevent the model from sliding off. Holes are designed for 5mm screws but double sided tape works well to hold up the model. I recommend printing the stand vertically as this allows for a stronger stand, supports will be needed for any orientation. The pictures provided shows the stand printed at a low quality at 0.28mm layer height and fits the diecast model perfectly.
