1 / 3
Tom's simple symmetrical stand for 120mm fan (2015 revival) — zdjęcie 1
1 / 3

Tom's simple symmetrical stand for 120mm fan (2015 revival)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area cooling).

Ocena
0 / 5
Polubienia
7
Pobrania
57
Wydruki
1
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My first ever model shared publicly in 2015 (on Thingiverse). Oh, those were the years with the first Printbot Simple Metal... :)

Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area cooling). No need of supports, no overhangs. Fits on 120×120×25mm fans. Just print two pieces with common settings. There are holes for long fan screws, but it will hold even without one (friction).

This mount was (around 2015 :) ) especially useful if you use heated bed with PLA, what is a bit deadly combination (code name: overhangs). Fan will be higher than 60mm from the pad (made with Printrbot Simple Metal users in mind).

Instructions

No special instructions needed. Print it with standard settings (both pieces are identical). Tested with 0.4mm nozzle, 0.2mm layers, 20% infill and Fillamentum 1.75mm PLA.

Category: 3D Printer Accessories

Tagi