1 / 3
Tom's simple symmetrical stand for 120mm fan (2015 revival) — image 1
1 / 3

Tom's simple symmetrical stand for 120mm fan (2015 revival)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area cooling).

Rating
0 / 5
Likes
7
Downloads
57
Makes
1
Views
294
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

My first ever model shared publicly in 2015 (on Thingiverse). Oh, those were the years with the first Printbot Simple Metal... :)

Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area cooling). No need of supports, no overhangs. Fits on 120×120×25mm fans. Just print two pieces with common settings. There are holes for long fan screws, but it will hold even without one (friction).

This mount was (around 2015 :) ) especially useful if you use heated bed with PLA, what is a bit deadly combination (code name: overhangs). Fan will be higher than 60mm from the pad (made with Printrbot Simple Metal users in mind).

Instructions

No special instructions needed. Print it with standard settings (both pieces are identical). Tested with 0.4mm nozzle, 0.2mm layers, 20% infill and Fillamentum 1.75mm PLA.

Category: 3D Printer Accessories

Tags